Custom Menu - Omron ZFV-C Manual

Section 4
Inspecting by Position (POSITION)
■ Adjusting the threshold level
● Switching to
ADJ mode
ADJ
MENU RUN
Setting item
Edge position
Edge level

CUSTOM Menu

Items that can be customized
Items related to
edge detection
Items related to
color
ZFV-C
76
User's Manual
● Adjustment of edge
position
POSITION
GAP
Amount of shift
UP/DOWN keys: Change values.
Range
0 to 468 Amount of shift from reference position
0 to 100 This is the density level judged to be an edge.
Adjust this level when measurement is unstable.
p.73
Items that can be customized
Selecting the color of edges
Selecting the edge detection direction
Changing edge sensitivity
Changing the color mode (default: [FILTER])
Changing the filter color (only when [FILTER] is selected in [COL MODE])
Teaching Brightness (only when [PICKUP] is selected in [COL MODE])
OK
Measured
120
values
[ 150]
Threshold
• When edge detection direction is →
UP/DOWN keys: Change values.
• When edge detection direction is ↓
LEFT/RIGHT keys: Change values.
Details of Adjustment
● Adjustment of
edge level
Edge level
POSITION OK
:LEV CHANGE
EDGE LEV [ 50]
Edge level
Page
p.77
p.77
p.77
p.74
p.65
p.65