Omron ZFV-C Manual page 51

■ Adjusting the Sensor Head Focus
1.
Set the menu selector switch to "STD
menu" and the mode selector switch to
"MENU mode".
2.
Set the reference workpiece in place.
3.
Place the cursor on
SET Key.
4.
Adjust the camera's setting distance.
Refer to the graph and set the camera in a
position so that the area to be checked is
within the detection area (LCD monitor).
Reference
workpiece
and press the
Detection range (H)
Section 2
Sensor Head
ADJ
MENU RUN
MENU
TEACH
Detected distance (L)
ZFV-C
User's Manual
49