Part Names And Functions - Omron ZFV-C Manual

Section 1

Part Names and Functions

Part Names and Functions

The following describes the names and functions of parts on the Amplifier Unit and Sensor
Head.
■ Amplifier unit
(1) OUTPUT indicator
(2) RUN indicator
(3) ERR indicator
(4) READY indicator
(5) Menu selector switch
No.
(1) OUTPUT indicator
(2) RUN indicator
(3) ERROR indicator
(4) READY indicator
(5) Menu selector switch
(6) Mode selector switch
(7) Control keys
(8) LCD monitor
ZFV-C
24
User's Manual
OUTPUT
RUN
ERR
READY
TEACH
A B
C D
ADJ
STD EXP MENU RUN
(12) USB port
Name
The Output indicator lits when the OUTPUT signal turns ON.
The RUN indicator turns ON in the RUN mode.
The ERROR indicator turns ON when an error is generated.
The READY indicator lits after the amplifier unit starts up correctly.
This switch is for the setup menu.
STD .......Standard menu. Select this when setting the minimum required
EXP .......Expert menu. Select this item when making a more detailed
This switch selects the operating mode.
MENU ....Select this mode when setting measurement conditions.
ADJ........Select this mode when adjusting the judgment threshold value.
RUN.......Select this mode when performing measurement.
The Control Keys are for setting measurement conditions and other infor-
mation.
The LCD monitor displays setup menus and images captured from the
Sensor Head.
(9) Sensor Head connector
(8) LCD monitor
ESC
/VIEW (7) Control keys
SET
(6) Mode selector switch
(13) RS-232C connector
(11) I/O cable
Description
items for measurement.
setup.
The judgment results is output from the I/O cables only when
the RUN mode is currently selected.
Key Operations p.57, p.60
(10) Coupler