Section 4
Setting Method
Setting for READ OK signal output
When you want to output reading succeeded to the READ OK signal, set the conditions
of output system and duration, then set them for "signal output (X*Q)".
The READ NG signal is output when any code other than the labels registered in
"Setting for label registration" (p.78) is read.
Output the signal (Factory default setting)
Not output the signal
External trigger signal synchronous system (positive logic, H active) (Factory default
setting)
External trigger signal synchronous system (negative logic, L active)
One-shot system (positive logic, H active)
One-shot system (negative logic, L active)
One-shot duration: 10 ms
One-shot duration: 20 ms
One-shot duration: 30 ms
V400-R1CF/R1CS
76
User's Manual
Menu sheet
_X*Q_
_X*R_
_X*C_
_X*D_
_X*E_
_X*F_
_X*G_
_X*H_
_X*I_
Command
[X*Q
[X*R
[X*C
[X*D
[X*E
[X*F
[X*G
[X*H
[X*I