Detail Setting For Reading Code - Omron V400-R1CF User Manual

Detail setting for reading code

Conditions for details about reading codes, such as whether to use the check digit (C/
D) or to transmit the start code/stop code (ST/SP), are set.
UPC-A
Transfer C/D without an 0 in the beginning (Factory default setting)
Not transfer C/D without an 0 in the beginning
Transfer C/D with 0 in the beginning
Not transfer C/D with 0 in the beginning
UPC-E
Transfer C/D without an 0 in the beginning (Factory default setting)
Not transfer C/D without an 0 in the beginning
Transfer C/D with 0 in the beginning
Not transfer C/D with 0 in the beginning
Menu sheet
_E3_
_E5_
_E2_
_E4_
Menu sheet
_E7_
_E9_
_E6_
_E8_
Section 4
Setting Method
Command
E3
E5
E2
E4
Command
E7
E9
E6
E8
V400-R1CF/R1CS
User's Manual
63