Table of Contents
Advertisement
Section 4
Setting Method
How to Use a Menu Sheet/Command
The following two setting methods are available for the reader. Select either method
depending on the condition.
Setting method
Reading a menu sheet
Inputting a command from the upper
equipment
Reading a menu sheet
The menu sheet is a special code used to set the reader function.
Setting can be changed by reading this menu sheet.
1.
Read the menu sheet "ZZ" that starts/ends the setting procedure.
The buzzer sounds continuously, indicating that the reader has entered the setting mode.
2.
Read the menu sheet "U2" that restores the factory default settings.
3.
Read the menu sheet for the setting item you want to change.
Menu Sheet/Command List p.56
4.
To finish, read the menu sheet "ZZ" that starts/ends the setting procedure.
The buzzer stops and the reader returns to the normal mode.
V400-R1CF/R1CS
54
User's Manual
This method reads the menu sheet of the function you want to set.
This is convenient for the initial setting and when testing.
This method inputs a command from the upper equipment.
This is convenient when changing setup according to the type of code.
_ZZ_
_U2_
_ZZ_
Description
Advertisement
Table of Contents
