Installing The Video Input Unit; Video Input Unit Components; Nomenclature And Functions - Omron NS10-TV Series Setup Manual

3-7-2

Nomenclature and Functions

Familiarize yourself with the nomenclature and functions of the Video Board before using the
Video Input Unit.
Video Board: Front View
Console Port Connector
Connects to the console connector
of OMRON Vision Sensors and
allows Vision Sensor settings
to be performed from the PT.
Video Board: Rear View
Precautions
for Correct Use
Video Input Specifications
Input system
Scanning system (See note.)
Input signal
Signal input connector
Note: The NS-series PTs do not support progressive scanning (i.e., non-interlaced scanning).
Four Video Input Connectors
BNC connectors for inputting NTSC/PAL
signals.
Expansion Interface Connector
Connects to the PT's expansion interface connector
when mounting the Video Board.
The NS-series PTs support video input for standard NTSC and PAL signals.
Display may not be possible, however, if the input signal deviates from the stan-
dard signal. Before operation, be sure to check the output signal of the camera
to be used. If display cannot be made, take measures so that the input signal is
a standard signal.
Item
Positions of screws for
attaching Video Board to PT
Contrast Adjuster
Used to adjust the contrast for video
input. All 4 channels are adjusted
together. They cannot be adjusted
individually.
Specifications
NTSC (RS-170A compliant) or PAL
Interlaced
1.0 V p-p 75 Ω
BNC connector

3-7 Installing the Video Input Unit

3-33