Displays; Operation Keys - Omron H8PS Manual

Nomenclature

■ Displays

8-output Models
(1) Cam output indicators
(2) PV/SV indicator
1 2
(4) Rotation display
monitor
CAM
(6) Cam No. display
(7) Step No. display
16-/32-output Models
(1) Cam output indicators
(2) PV/SV indicator
1 2
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
(3) Start input
31 32
indication
(4) Rotation display
monitor
(5) Bank No. display
CAM
(6) Cam No. display
(7) Step No. display

■ Operation Keys

8-output Models
11. ADV key CAM
12. Mode switch
PRGM
TCH
TEST
13. Programming
MAN
RUN
mode switch
CW
1 2 3 4
3
ON
14. Rotation direction ON
ON
OFF
OFF
switch
OFF
CCW
DO NOT USE.
15. Encoder resolution
switch
16-/32-output Models
CAM
11. ADV key
12. Mode switch
PRGM
TCH
TEST
RUN MAN
13. Programming
CW
mode switch
1 2 3 4
3
ON
ON
14. Rotation direction ON
OFF
OFF
switch OFF
CCW DO NOT USE.
15. Encoder resolution
switch
3 4 5 6 7 8 PRG
TST
RUN
STEP
3 4 5 6 7 8 9 10 PRG
TST
RUN
STEP
CHECK
CAM
STEP
STEP
ON OFF
ADV
ANGLE
WRITE
ANG
4
PLS/R
DSPL
CLEAR
ORIGIN
256 256
ON
OFF 256 360
360 360
ON
720 360
OFF
CHECK
CAM
STEP
STEP
BANK ON OFF
ADV
ANGLE
WRITE
ANG
4
PLS/R
DSPL CLEAR
ORIGIN
ON 256 256
256 360
OFF
360 360
ON
720 360
OFF
Display Details
No. Display
(8) All protect
color
indication
(1) Orange Lit while cam outputs are ON.
(9) Mode indicator
(2) Red
(10) Main display
(3) Orange Lit while the start input is ON in Run or Test Mode.
(11) Unit indication
(12) 256 indication
(4) Orange Displays Encoder present angular position, direction, and speed
(13) Unit indication
(5) Green
(14) Sub-display
(15) ON/OFF (6) Green
indication
(16) ADV indication
(7) Green
(8) Orange Lit while the All Protection function is enabled.
(8) All protect (9) Orange The indicator for the selected mode is lit.
indication
(9) Mode indicator
(10) Red
(10) Main display
(11) Red
(11) Unit indication
(12) Red
(12) 256 indication
(13) Green
(13) Unit indication
(14) Green
(14) Sub-display
(15) Green
(15) ON/OFF
indication
(16) Green
(16) ADV indication
Operation Key Details
No.
1 Displays program details in Run Mode.
1. CHECK key
2
Selects the cam number with
3
Selects the step number with
2. CAM keys
4 Selects the bank number.
5 Selects the ON angle, or OFF angle
3. STEP keys
6 Writes the set data to memory.
7
Changes the angle or other setting value with
8 Connects the Cam Positioner to a personal computer via USB cable (order
separately) for programming with the Support Software (order separately).
5. ON/OFF key
9 Moves to the screen for clearing settings
6. WRITE key
10 Designates the current angle of the machine (Encoder) as the origin (0 ).
7. ANGLE keys
11 Programming or Test Mode:Press to shift to the ADV function setting
9. CLEAR key
Programming Mode: Press and hold at least 3 s to shift to the Function
10. ORIGIN key
Run Mode: Press and hold at least 5 s to enable/disable the All Protection
12 Switches modes.
Programming Mode (PRGM):
1. CHECK key
Test Mode (TEST): Used to modify settings while the Encoder is running.
Run Mode (RUN):
2. CAM keys 13 Select the method used for programming cams.
Teaching: ON/OFF Angles can be set based on actual machine (Encoder)
3. STEP keys
Manual:
14 Sets the H8PS rotation direction (rotation display monitor, etc.) to the
4. BANK key
machine (Encoder) rotation direction.
15 Sets the resolution of the connected Encoder.
5. ON/OFF key
Also sets the unit for angle display when using an Encoder with a
resolution of 256.
6. WRITE key
7. ANGLE keys
8. USB connector
9. CLEAR key
10. ORIGIN key
Description
PV: Lit while the present angular position or speed is displayed in
main display.
SV: Lit while the setting value is displayed in main display.
Not lit when an error occurs.
guidelines.
Displays the bank number that is running in Run or Test Mode and
the bank number selected in Programming Mode.
Displays the cam number for the angle setting displayed on sub-
display.
Displays the step number for the angle setting displayed on sub-
display.
PRG: Programming Mode
TST: Test Mode
RUN: Run Mode
Displays the present angular position or the speed and settings
being made.
Displays units for the angle or the speed displayed on main display.
Lit while using an Encoder with a resolution of 256 if 256 display is
selected.
Displays units for the angle or the speed displayed on sub-display.
Displays the speed or the ON/OFF angle settings.
Indicates whether main display displays the ON or OFF angle
setting.
Lit while setting the Advance Angle Compensation (ADV) Function.
Description
Keys.
Keys.
screen.
Setting Mode.
function.
Used to write cam programs, set the ADV function,
etc.
Used for normal operation and to check the cam
program.
operation.
ANGLE Keys can be used to set ON/OFF angles.
H8PS
Cam Positioner
Keys.
11