Editing Temperature Controller Parameters - Omron EJ1 - 07-2008 Operation Manual

Operations from the Edit Device Parameters Window
5-2-9

Editing Temperature Controller Parameters

1,2,3...
The Configurator can be used to edit the parameters of each connected Tem-
perature Controller through the DeviceNet Communications Unit.
1. Open the Edit Device Parameters Window for the DeviceNet Communica-
tions Unit, click the General Tab and click the Set Button next to the Tem-
perature Controller unit number under Unit Configuration.
2. A window for editing the unit parameters of the corresponding Temperature
Controller will be displayed.
Note a) This icon indicates parameters that are shared by ch1 to ch4.
If a value for any channel is changed, the other value will also
change.
Section 5-2
93