Omron E5ZE Datasheet page 17

Installation
I/O Units
I/O Units are not mounted on the E5ZE.
Mount the appropriate I/O Units according to the specification of the E5ZE.
The diagram below is the view from the back of component side.
Type of I/O Units
Communication Unit
CT Input Unit
Output Unit
Tighten the screws through the holes marked with a black dot ( ) to the fixing studs of the E5ZE.
Mounting Position of I/O Units
With Casing Without Casing
E53-E01 for
RS-232C
E54-E8CT
E53-E8Q for voltage
output
Communication Unit
CT Input Unit
Output Unit
or
Use this CT input unit in combination
with the E53-E8Q voltage output unit.
or
Remove this screw when the Unit is
mounted on the model with casing.
Multipoint Temperature Controller
E53-E04 for
RS-422/RS-485
E53-E8C for current
output
Connector
Communication
Unit
CT Input Unit
Connector
Output Unit
Connector
E5ZE
17