Srm1(-V2) Cycle Time And I/O Response Time; The Srm1(-V2) Cycle - Omron CPM1 - PROGRAMING MANUAL 02-2001 Programming Manual

SRM1(-V2) Cycle Time and I/O Response Time

8-3

SRM1(-V2) Cycle Time and I/O Response Time

8-3-1 The SRM1(-V2) Cycle

The overall flow of SRM1(-V2) operation is as shown in the following flowchart.
Note 1. The cycle time can be read using Programming Devices.
2. Cycle time maximum and current cycle time are stored in AR 14 and AR 15.
3. Change to processing will cause cycle times to change therefore the calcu-
lated values and actual values (for cycle time) will no always match.
Initialization
Overseeing
processes
CompoBus/S
end wait
Input
refreshing
Program
execution
Cycle
time
Cycle time
processing
Output re-
freshing
RS-232C
servicing
Peripheral
port ser-
vicing
Section 8-3
537