Omron CP1L - 12-2007 Operation Manual page 332

Inverter Positioning
Parameter
No.
n003 RUN command selection
n004 Frequency reference selection
n005 Stopping method selection
n006 Reverse rotation-prohibit
selection
n011 Maximum frequency (FMAX)
n016 Minimum output frequency
(FMIN)
n018 Acceleration/deceleration time
setting unit
n019 Acceleration time 1
n020 Deceleration time 1
n151 RS-422A/485 communications
timeover detection selection
(The time between receiving
PLC signals is monitored, Tim-
eout time: 2 s.)
n152 RS-422A/485 communications
frequency reference/display
unit selection
Example settings of 3G3MV parameters are listed below. Refer to the User's
Manual of the Inverter for details on the parameters.
Name
0: The RUN Key and STOP/RESET Key on the
Digital Operator are enabled.
1: Multi-function input is enabled through the con-
trol circuit terminals.
2: RS-422A/485 communications are enabled.
3: Input is enabled from the optional Communica-
tions Unit.
0: Frequency reference adjustment
1: Frequency reference 1 (n024)
2: Frequency reference control terminal (0 to 10
V)
3: Frequency reference control terminal (4 to 20
mA)
4: Frequency reference control terminal (0 to 20
mA)
5: Pulse train reference control terminal
6: Frequency reference through RS-422A/RS-485
7: Multi-function analog voltage input (0 to 10 V)
8: Multi-function analog current input (4 to 20 mA)
9: Frequency reference input through optional
Communications Unit.
0: Decelerates to stop
1: Coasts to stop
0: Reverse enabled
1: Reverse disabled
50.0 to 400.0 Hz (0.1-Hz increments)
0.1 Hz to 10.0 Hz (0.1-Hz increments)
0: 0.1 s
1: 0.01 s
0 to 6,000 s
0 to 6,000 s
0: Detects time-over, fatal error, and the Inverter
coasts to a stop.
1: Detects time-over, detects fatal error, and the
Inverter decelerates to a stop in deceleration time
1.
2: Detects time-over, detects fatal error, and the
Inverter decelerates to a stop in deceleration time
2.
3: Detects time-over, detects nonfatal error warn-
ing, and the Inverter continues operating.
4: No time-over is detected.
0: 0.1 Hz
1: 0.01 Hz
2: Converted value based on 30,000 decimal as
maximum frequency
3: 0.1% (Maximum frequency: 100%)
Description
Section 5-3
Default Setting
0 2
0 6
0 0
0 0
60.0 Hz 60.0 Hz
(Depends
on machine
configura-
tion.)
1.5 Hz 0.1 Hz
0 0
10.0 s 0
10.0 s 0
0 0
0 1
299