Front Panel Facilities - Pioneer SX-P930 Operating Instructions Manual

FRONT PANEL FACILITIES
STEREO RECEIVER: SX-P930
@ POWER STANDBY/ON switch
This is the switch for electric power.
ON: When set to the ON position, power is sup-
plied and the unit becomes operational.
STANDBY: When set to the STANDBY position, the
main power flow is cut and the unit is no
jonger fully operational, A minute flow of
power feeds the unit to maintain operation
readiness.
The receiver section display indicates only
the time.
@ Center/rear level adjustment knob
(CENTER/REAR LEVEL) (p. 43)
The sound level of the center and surround speakers
can be adjusted with this knob.
The rear or center level can be adjusted by the mode
selector button @).
@ Mode selector button (MODE) {p. 43)
Use to adjust the center and rear tevel.
Each time this button is pressed, one of the settings
will be selected in the following order.
Center level (CENTER)
Rear jevel (REAR) poke
© Function indicators
(TUNER,
TAPE, CD , LD, PHONO,
VCR/DAT)
® VOLUME contro!
©) P.BASS LEVEL contro!
P.BASS stands for Proper Bass Active Supply System,
and refers to the built-in system for emphasizing low
'sound ranges.
This unit is equipped with the Super P.BASS to allow
you to select two kinds of bass reproduction, depend-
ing on the kind of music source and your own prefer-
ence. This knob can be used to adjust the super
P.BASS level when the SUPER P.BASS button is set
ta ON,
12
<ARB1I415>
En
@ FREQ/STATION button
Use to select the display mode (frequency mode or
station mode}.
© Frequency mode: Display indicates the frequency
of the tuned station, and the current time,
® Station mode: Display indicates the frequency of
the tuned station together with the recorded sta-
tion number assigned te that station.
TUNING JOG control
Use to set the time and tune the receiver's reception
frequency.
© BAND button 4
Use to select FM or AM bands.
@® MIC (microphone) jack and MIC LEVEL
{microphone level) control
) TIMER CONTROL buttons
(CLOCK ADJ, REC, WAKE-UP, SET)
Use these buttons to set the current clock time and
the timer for timed recording and playback.
@ Display
@® TUNER buttons
* LOCAL button: Set to on when nearby FM broad-
cast signals are too strong, resulting in distortion.
@ M.SCAN (memory scan} button: Automatically
scans {for about five seconds each) each of the sta-
tions stored in the station memory.
® MEMORY (AUTO) button: Use to save broadcast-
ing stations in the station memory.
®@ AUTO-TUNE button: If this button is set ON, the
frequency changes automatically and the tuning
stops at the first station that is received.
SUPER P.BASS button
Use this button to select from among the two types
of super P.BASS effect desired, then use the P.BASS.
level contro! to adjust the level as desired.
® Rem
Heat
@ FUN
Use»
The s
is pre
Tt
vi
Soun
@ Effec
if this
tion ¢
is rep
the s
repro:
Each
will b
EF
EF
@ Dolb
This t
LoGK
Each
wilt b
Pre
OF
(Sf
® Surre
This t
conne
if the
sensa
Each:
will 6
aS