Rear Panel Facilities - Pioneer SX-P930 Operating Instructions Manual

REAR PANEL FACILITIES
STEREO RECEIVER: SX-P930
pairs
a i
@ Power cord
Connect this to the AC wall socket.
@ VOLTAGE SELECTORS (See page 1.)
@) SYSTEM jack
Connect the system cable here,
@ SPEAKER (CENTER) jack
Connect the center speaker to this jack
NOTE:
Connect a speaker system with a nominal impedance
ranging trom 8 Q to 16 Q.
© SPEAKERS (REAR) jack
Connect the surround speaker systems.
NOTE:
Connect a speaker system with a nominal impedance
of 16 Q or more.
SPEAKERS (FRONT) terminals
L: Connect the left speaker system as seen from the
listening position.
R: Connect the right speaker system as seen from the
listening position,
10
<ARBI4A15>
En
NOTE:
Do not allow any of the cord's conductors to protrude
from the terminals or touch any other conductors. Mal-
functioning or breakdowns may occur when conductors
come into contact with each other,
Use a center speaker of impedance 82 — 162,
@ SOUND PROCESSOR jack
Connect the SOUND FIELD PROCESSOR system ca-
ble here.
FM/AM ANTENNA terminals
Antennas must be connected to these terminals:
otherwise station reception is not possible. See page
7 for details on ANTENNA CONNECTIONS.
| fg] |
@ sys
@ ver
IN/P
oul
@Lp
Con
play
@®Mo
Con
| E (
@ sys
Con