Front Panel Facilities - Pioneer DC-110Z Operating Instructions Manual

FRONT PANEL FACILITIES
NOTE:
The illustration is of the TX-220ZL/TX-2212ZL.
@ FREQUENCY display
@ FUNCTION switch
MW: Push to receive MW band broadcasts.
LW: Push to receive LW band broadcasts.
FM: Push to receive FM band broadcasts.
@ MEMORY switch |
Push to operate the memory circuit. After the switch is pressed, the memory
circuit will function for about ten seconds. During this time, press one of the
STATION CALL switches to memorize the station being currently received.
If
more than ten seconds elapses after the MEMORY switch is pressed, no sta-
tions can be memorized. In this case, press the MEMORY switch again if you
wish to memorize a station.
@ TUNING switches
@ TUNED indicator _
This lights to indicate when the finest tuning of a station has been achieved.
NOTE:
The illustration is of the TX-11OZL/TX-17 1ZL.
@ POWER indicator
@ TUNED indicator
This lights up to indicate when finest tuning of a station
has been achieved.
@ STEREO indicator
This lights when a stereo program has been picked up during
an FM broad-
cast.
© Function switch
MW: Push to receive MW band broadcasts.
LW: Push to receive LW band broadcasts.
FM: Push to receive FM band broadcasts.
@ Tuning knob
Rotate this knob to pick up station.
@ Dial pointer
NOTE:
Iilustration shows
the PL-2202/PL-2212.
NOTE:
@ SPEED switch
Platter
Rubber mat
Platter shaft
e090 8
EP adaptor
@ Dust cover
© ARM elevation switch
@ Arm rest and clamper
Clamper is not provided on PL-110Z/PL-1112Z.
@ Tonearm
@ Cartridge
*NOTE: