Pager Call.56; Storing A Pager Number.56 - Panasonic KX-TGA420B Operating Instructions Manual

Pager Call
This feature allows the station unit to alert your pager when your mailbox
has received an incoming message from an outside caller (When a
message has been transferred or delivered from another user, the unit will
not alert your pager) You can retrieve the message from a touch tone
telephone (p 53) If you subscribe to a Caller ID service, the caller's
telephone number will be displayed on your pager
First store a pager number and the pager display number (p 56, 57), then
set the unit to call the pager
Make sure that the station unit is m the standby mode.
Storing a Pager Number
J Press I
FUNCTION I
2 Press v or A until the arrow
points to
"Pager setting",
and press ►
3 While
"Pager number"
is at the
arrow, press ►
Enter pager No
• If the number has already been
stored, it will be displayed
4 Enter your pager number, and
press (PAUSE) twice * Enter the
access code, if required by your
pager company
OR
If you use a 1-800 pager
number with a pager PIN
code
Enter the 1-800 number, and
press [PAUSEI 3 times *
Enter the pager PIN code
• It you misdial, press I CLEAR I
Digits are erased from the right To
erase all the digits, press and hold
[CLEAR]
• You can enter a total of 44 digits
5 Press
I ENTER |
• A beep sounds
• To return to the standby mode,
press (EXIT]
• If the line(s) has(have) rotary or pulse
service, press (*) between the pager
number and [PAUSEI in step 4
• If you stored a 1 -800 pager number,
alphanumeric voice dispatch pager
services will not work with this
function
'Pager companies require a delay
after the pager number and/or the
access code is dialed
For a 1-800 pager number, a delay
will be required after the pager
number and the pager
PIN
code are
dialed
Contact your pager company
regarding the required pause time
Pressing I PAUSE] once creates a
3 5 second delay and counts as one
digit
56