Intercom; Making Intercom Calls; Answering Intercom Calls - Panasonic KX-TGA420B Operating Instructions Manual

Intercom
You can talk to the operator (base unit user) or another extension user
(cordless handset user or another station unit user) using the intercom line.
The extension number is assigned at registration to the station unit
(p. 12, 13). The base unit has the number "0".
Making Intercom Calls
J Press
[INTERCOM
1.
2 To page the operator (base unit), enter (o)
To page another extension (cordless
handset/another station unit), enter the
number (Q to {§}).
• The paged unit rings.
• To stop paging, press (INTERCOM).
• After the paged party answers, the display will
show the length of the call.
3 When the other party's voice is heard, lift
the handset off the cradle or talk into the
MIC (microphone).
4 To end the intercom, replace the handset
on the cradle or press (DIGITAL SP-PHONE
Answering Intercom Calls
After the rings, lift the handset off the cradle or Ex. Base Unit paging
press [DIGITAL SP-PHONEI. Extension 2
To end the intercom, replace the handset on the (
cradle or press [DIGITAL SP PHONE).
Call [2] (-[0]
During an intercom call:
• If an incoming call is being received, you will hear two tones (incoming call
tone, p. 37). To answer, press the relevant line button.
• If the unit detects a problem, an error message will be displayed (p. 64).
• When the ringer volumes is set to OFF, the station unit will not ring (p. 16).
22