Programmable Settings; Programming Guidelines - Panasonic KX-TGA420B Operating Instructions Manual

Programmable Settings
Programming Guidelines
This station unit has programmable functions. Most of them are selected
from the function menu on the display (p. 15).
i FUNCTION/EXiT)
Navigator Key
<V. A, ►, ◄)
How to select a function item from the menu
1. Press (function! while in the standby mode. The main menu is
displayed (see next page).
2. You can scroll through the menu by
pressing y or a Find the desired item
and point the arrow to the item by pressing
v or A
3. Press ► to select the item.
4. If the selected item has a sub-menu, it will be displayed. Select the
sub-menu item by pressing
y
or
a,
and press ►.
5. You can then select the desired setting.
• [ENTER) is used to select or save a programming setting.
6. When programming is complete, a confirmation tone sounds. The
display will return to the main menu or the sub-menu (if the function item
is in the sub-menu). You can continue programming other items. To
return to the standby mode, press (EXIT!.
Ex. Ringer setting is at
the arrow.
Save directory
►Ringer
setting
Line selection
Useful information:
• You can go back to the previous display by pressing ◄ except when entering
characters or numbers. To return to the main menu from the sub-menu, press ◄.
• You can exit the programming mode any time by pressing [EXIT].
• If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
• If the unit detects a problem, an error message will be displayed (p. 64).
14