Temporary Tone Dialing (For Rotary Or Pulse Service Users); Other Programmable Settings - Panasonic KX-TGA420B Operating Instructions Manual

Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press [TONE! before entering access numbers which require tone dialing.
• The dialing mode changes to tone. You can enter numbers to access an
answering service, electronic banking service, etc. When you hang up, the mode
will return to pulse. _
• Access numbers entered after pressing (TONE) will not be included when
redialing.
Other Programmable Settings
Selecting the Ringer Pattern
You can select the desired ringer patterns. 4 patterns are available for
each line. Your phone comes from the factory set to pattern 1.
Make sure that the station unit is in the standby mode.
J Press ifunction!.
2 Press v or a until the arrow points to
"Ringer setting",
and press ►.
3 Press v or A until the arrow points to
"Ringer pattern",
and press ►.
• The current settings are displayed.
If registered to KX-TG2000B, "L3" and "L4" are
inoperative.
Save directory
►Ringer setting
Line selection
Ringer volume
►Ringer pattern
Incoming call
Ringer pattern
L2 L3 L4
4 Enter the desired pattern using the dialing
buttons ((Tj to (4)) for each line. To move to
another line, press ► or ◄.
• If registered to KX-TG2000B, do not select "L3" and "L4".
• Each time you select a pattern, it rings.
5 Press I ENTER I.
• A beep sounds.
• To return to the standby mode, press
[EXtTj.
For users registered to KX-TG2000B:
LINE 3 and LINE 4 ringer pattern settings are inoperative.
For assistance, please call: 1-800-211-PANA{7262)