Incoming Call Tone.37 - Panasonic KX-TGA420B Operating Instructions Manual

Incoming Call Tone
While using one line, you can be informed if another call arrives on another
line by two tones. During an intercom call or while listening to messages
(p. 48), you can also be informed by two tones if a call arrives.
If you set to ON, this incoming call tone will be heard for as long as another
line rings. To delete this incoming call tone, set to OFF. To set the
incoming call tone to sound twice, set to "2".
Your phone comes from the factory set to "2".
Make sure that the station unit is in the standby mode.
1
Press
fFDNCTiONl.
2
Press v or a until the arrow points to
"Ringer setting",
and press ►.
3 Press
v
or
A
until the arrow points to
"Incoming call",
and press ►.
• The current setting is displayed.
4
Select the desired setting,
"on",
"off" or
"2"
by pressing v or a .
5 Press
[ENTER).
• A beep sounds. _
• To return to the standby mode, press I
EXIT
I.
Save directory
►Ringer setting
Line selection
Ringer volume
Ringer pattern
►Incoming call
Incoming call,
,
tone ^2 ^
va
ENTER=£>at)e
Incoming call^
,
tone:£)n
va
ENTER=S&v'e
I For assistance, please call: 1-800-211'PANA{7262)]
37