P Utting The Display In Standby Mode - Smeg FP38X Operating Manual

99634242_ML_pyro.qxd 19/11/04
P
utting the display in standby mode
To reduce your oven's power consumption to a minimum when it is not in use, you can put
the display in STANDBY MODE.
To perform this operation, proceed as follows:
ACTIVATING STANDBY MODE:
- Your oven must be in normal time display
mode.
- Press the + and – buttons together for five
seconds at the same time.
- The display reads "Lcd off".
- Take your fingers off the two buttons.
- 30 seconds later your display will switch off.
Your oven is now in standby mode; when it is
in normal time display mode it will turn off
automatically after 30 seconds.
DISACTIVATING STANDBY MODE:
- Your oven must be in the normal time
display mode.
Press the + and – buttons together for five
seconds at the same time.
- The display reads "Lcd on".
- Take your fingers off the two buttons.
- You are now out of STANDBY MODE; the dis-
play is now permanently on.
94
14:30 Page 94
START
STOP
STAR ST ART
STOP ST OP
ST STAR ART
START
STOP ST OP
STOP
START
STOP
START
START
STOP
STOP
STAR ST ART
START STOP ST OP
STOP
STAR ST ART
ST STOP OP
START
STOP
START
STOP