S Etting Cooking Temperature - Smeg FP38X Operating Manual

99634242_ML_pyro.qxd 19/11/04
S
etting cooking temperature
During the selection of the cooking mode or during the cooking cycle, you can set or change
the temperature.
Press on the °C button for about two seconds
until the temperature figures starts flashing.
Adjust the temperature using the + or - but-
tons until you reach the temperature that you
wish to record.
Confirm your choice by pressing on button °C.
For later cooking sessions, the temperature that you have just recorded will be saved.
This cooking temperature adjustment operation can be renewed as often as you wish
S
tarting a programmed cooking session
Set the chosen cooking mode and adjust the temperature if necessary.
Example:
Natural convection
Temperature: 220°C.
Press the "cooking time" button
The cooking time (0:00) will flash with the
set.
Press on the + or - buttons to set the desired
cooking time.
Example: 25 minutes cooking time.
The cooking time that you have set will be auto-
matically recorded after a few seconds or can be confirmed by pressing once again on the
button . The clock time will then appear once again on the display and the
bol stops flashing.
14:30 Page 91
ST STAR ART
STOP ST OP
START
STOP
symbol to show that the cooking time can be
START
STOP
START
STOP
START
STOP
STAR ST ART
STOP ST OP
START
STOP
START
STOP
STAR ST ART
STOP ST OP
START
STOP
START
STOP
STAR ST ART
ST STOP OP
START
STOP
START
STOP
START
STOP
START
STOP
GB
sym-
91