Positioning The Oven - Smeg F610AN Manual

Instructions for the installer

10.3 Positioning the oven

Never use the oven door to lever the oven into place when fitting. Avoid exerting
too much pressure on the oven door when open.
We recommend installing the oven with the help of a second person.
The base on which the oven is resting must be complete as shown in the
illustrations below.
The oven is designed for
mounting into any piece of
furniture as long as it is heat-
resistant. The adjacent figure
shows the general dimensions of
the appliance.
For installing under a work top,
follow the dimensions given in
paragraph "10.3.1 Positioning
underneath worktops".
When installing in tall units,
comply with the dimensions
shown in paragraph "10.3.2
Positioning in tall units", bearing
in mind that the top/rear of the
unit must have an opening 35-40
mm deep.
For under-counter installation, make sure the back of the cabinet has an
opening of about 60 mm (as shown in the next figure).
To position and fasten a burner top, see the relevant instructions enclosed with
that type of appliance.
105