Removing The Internal Glass Panel; Removing The Middle Glass Panes; Replacing The Glass Panels - Smeg F610AN Manual

Instructions for the user

Removing the internal glass panel:

• Remove the internal glass panel by
pulling it upwards,
movement indicated by the arrows. Doing
this detaches the 4 pins attached to the
glass from their slots in the oven door.

Removing the middle glass panes:

(pyrolytic models)
• There are two middle glass panels in
pyrolytic models, attached using 4 small
locks. Remove the middle panels by lifting
them upwards.
(multifunction models)
• Multifunction models have a single middle
panel. Remove the intermediate panel by
lifting it upwards.
Cleaning:
• It is now possible to clean the external
glass panel and the panels removed
previously. Use absorbent kitchen roll. In
the case of stubborn dirt, wash with a
damp sponge and neutral detergent.

Replacing the glass panels:

• Replace the panels in the reverse of the
order in which they were removed.
• Reposition the internal glass panel, taking
care to centre and insert the 4 pins
attached to the glass into their slots in the
oven door by applying slight pressure.
following the
101