Positioning The Oven - Smeg SCP496N-8 Manual

Table of Contents

Advertisement

Instructions for the installer

10.4 Positioning the oven

Never use the oven door to lever the oven into place when fitting. Avoid exerting
too much pressure on the oven door when open.
It is recommended to install the oven with the help of a second person.
The base on which the oven is resting must be complete as shown in the
illustrations below.
The
oven
is
mounting
into
any
furniture as long as it is heat-
resistant. The adjacent figure
shows
the
indicative
dimensions of the appliance.
For installing under a work top,
follow the dimensions given in
paragraph
"10.5
under a work top".
When installing in tall units,
comply
with
the
shown
in
paragraph
Installing in tall units", bearing in
mind that the top/rear of the unit
must
have
an
approximately 35-40 mm deep.
When installing under a work top, allow for a rear and bottom clearance of
approximately 60 mm (as shown in the figures below).
See the relevant instructions for fitting and securing a hob.
designed
for
piece
of
overall
Positioning
dimensions
"10.6
opening
89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scp496x-8

Table of Contents