Positioning The Oven - Smeg SC700AX-8 Manual

Instructions for the installer

10.3 Positioning the oven

Never use the oven door to lever the oven into place when fitting. Avoid exerting
too much pressure on the oven door when open.
We recommend installing the oven with the help of a second person.
The base on which the oven is resting must be complete as shown in the
illustrations below.
The oven is designed for mounting into any piece of furniture as long as it is heat-
resistant (90°C).
Proceed according to the dimensions shown in figures 1, 2 and 3.
For installing under a work top, follow the dimensions given in figures 1 and 2. For
installing under a work top with combined cooking hobs, ensure a minimum clearance
from any side walls of at least 110 mm.
For installing in tall units, comply with the dimensions shown in figures 1 and 2, bearing in
mind that the top/rear of the unit must have an opening 35-40 mm deep.
Remove the screw covers on the frame and screw in the 2 screws A (fig. 5) to fix the
appliance to the unit. Replace the screw covers. When installing beneath a countertop
hob, allow for a rear and bottom clearance as shown in figure 1 (ref. F).
See the relevant instructions for fitting and securing the appliance.
64