Setting The Assisted Cleaning Cycle - Smeg F610AN Manual

• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Aim the spray towards the side
walls, roof, floor and deflector (the
coloured zone on the figure to the side
shows where the solution can be
sprayed).
Do not spray excessive amounts of the water and washing up liquid solution. We
recommend spraying approx. 20 times at the most.
• Close the door and set the assisted cleaning cycle.

8.8.2 Setting the assisted cleaning cycle

The assisted cleaning cycle can be only be activated when the oven is cold. If it
is activated when the inside of the oven is still hot, the word STOP will appear on
the display.
In ON mode (see 6.5 Operating modes), press the function selection key
using either
To start the cleaning cycle (Vapor clean),
up to show that the cleaning phase is in progress. During the cleaning cycle the
inside light switches off.
The display will show the temperature at which the cleaning cycle is taking place
and the remaining time.
Parameters such as the duration and temperature of the cleaning cycle
cannot be modified.
96
Instructions for the user
or to select the VAPOR CLEAN cycle .
must be pressed.
,
will light