End Of The Assisted Cleaning Cycle - Smeg SC112-8 Manual

Instructions for the user
In ON mode (see 6.5 Operating modes), turn the
ON/OFF knob right or left to select the VAPOR
CLEAN cleaning cycle.
(ON/OFF knob)
To start the cleaning cycle (VAPOR CLEAN), the
temperature selection knob must be pressed.
will light up to show that the cleaning phase is in
progress.
(Temperature knob)
The display will show the temperature at which the cleaning cycle is taking place
and the remaining time.
Parameters such as the duration and temperature of the cleaning cycle
cannot be modified.

8.8.3 End of the assisted cleaning cycle

The water remaining at the end of the assisted cleaning cycle cannot be left
inside the oven for long (for example overnight).
You are advised to wear a pair of gloves during these processes.
At the end of the cleaning cycle, open the door and wipe away the less stubborn
dirt with a microfibre cloth. Use an anti-scratch sponge with brass filaments on
more difficult encrustations (we recommend removing the door to facilitate
access to restricted spaces). Dry the oven with a microfibre cloth.
For improved hygiene and to avoid food being affected by any unpleasant
odours, we recommend that the oven is dried using a fan function at 160°C for
approximately 10 minutes. To set the function, see "6.8 Selecting a cooking
function".
119