Smeg DUSC36X Instructions For Use Manual page 21

Instructions for the user
7.2.4 End of cooking
This function allows, as well as setting a cooking duration, a cooking end time to
be set (with a maximum delay of 12 hours in relation to the current time).
• Rotate the oven thermostat knob to the desired temperature
• Rotate the oven function knob to the desired function
• Set the cooking duration as described in the previous point ("Cooking
duration");
• Press and the sum of the current time plus the preset cooking time will
appear on the display.
• Press the value modification buttons
setting by one minute for each pressure until reaching the desired time;
• Wait about 5 seconds without pushing any buttons to start the function;
• The current time and the A symbol will be shown on the display;
• The start of cooking will be indicated by an acoustic alert and the A and
symbols will be shown on the display;
• Press to view the remaining time;
• Press to view the cooking end time;
• At the end of the cooking operation the timer will deactivate the oven heating
elements and the buzzer will sound. The A symbol will flash while the
symbol disappears;
• To silence the buzzer at the end of the time, press
and
• Press
• Proceed with manually switching off the oven if a cooking operation is in
progress.
The set programming can be reset by pressing
duration will be cancelled and the oven must be turned off manually if a cooking
operation is in progress.
simultaneously to reset the programmer;
or to increase or decrease the
;
. By doing this the set
67