Table of Contents
Advertisement
2. Gently rotate the plate and remove it from its
seat.
3. Proceed with installation of the power
supply cable.
It is recommended to slacken off the
cable clamp screw before installing the
power supply cable.
4. When finished, replace the plate on the rear
casing and secure it using the screws that
were previously removed.
Instructions for the installer
• If you use a plug (if present) to connect to
the power supply, the plug must be
accessible after installation.
• Do not bend or trap the power cable.
• The appliance must be installed according
to the installation diagrams.
• If the appliance does not work correctly
after having carried out all the checks,
contact your local Authorised Service
Centre.
• Once the appliance has been installed,
26 - INSTALLATION
please explain to the user how to use it
correctly.
91477A388/A
Advertisement
Table of Contents
