Description Of The Controls On The Front Panel - Smeg CC92MX8 Manual

Instructions for the user

4.1 Description of the controls on the front panel

4.1.1 Programming clock (on some models only)
The programming clock can be used to display the current time or to set a timer or a
programmed cooking operation.
4.1.2 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between the maximum and the minimum settings. This knob also enables
the temperature to be selected for the VAPOR CLEAN cleaning function (on some
models only).
The indicator light comes on to indicate that the oven is heating up. When this light
goes out, the preset heating temperature has been reached. When the light flashes
regularly, it means that the temperature inside the oven is kept constantly on the set
level.
4.1.3 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on the cooking functions, see:
"8. COOKING WITH THE OVEN".
4.1.4 Auxiliary oven thermostat knob
This knob allows to select the cooking function and the cooking temperature (only in
static function) for the auxiliary oven. Turning the knob to the position turns on
the light inside the auxiliary oven. To set the knob on "O" turn it always anti-
clockwise.
The indicator light comes on to indicate that the oven is heating up.
The indicator light goes out when the set temperature is reached. It flashes at
regular intervals to indicate that the temperature inside the oven is being kept
constantly at the set level.
4.1.5 Hob burners control knob
To light the flame, press the knob and turn it anti-clockwise to the maximum flame
symbol ( ). To adjust the flame, turn the knob to the zone between the maximum
( ) and the minimum ( ) settings. To turn off the burner, turn the knob to the
position.
(The adjacent symbol indicates the front left burner).
10