Description Of The Controls On The Front Panel - Smeg SUK92CBL8 Manual

Instructions for the user

4.1 Description of the controls on the front panel

4.1.1 Programming clock (on some models only)
The programming clock allows to display the current time or to set a timer or a
programmed cooking operation.
4.1.2 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between the maximum and the minimum settings. This knob also enables
the temperature to be selected for the VAPOR CLEAN cleaning function (on some
models only).
The indicator light comes on to indicate that the oven is heating up. When this light
goes out, the preset heating temperature has been reached. When the light flashes
regularly, it means that the temperature inside the oven is kept steady on the set
level.
4.1.3 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on cooking functions, see:
"8. COOKING WITH THE OVEN".
4.1.4 Auxiliary oven thermostat knob
This knob allows to select the cooking function and the cooking temperature (only in
static function) for the auxiliary oven. Turning the knob to the position turns on
the light inside the auxiliary oven. To set the knob on "O" turn it always anti-
clockwise.
The indicator light comes on to indicate that the oven is heating up.
The indicator light goes out when the set temperature is reached. It flashes at
regular intervals to indicate that the temperature inside the oven is being kept
constantly at the set level.
4.1.5 Hob burners control knob
Standard heating
To switch a zone on, press the knob and turn it to the required position. Adjustment
is continuous. To switch off a zone, return the knob to 0.
Double heating
To switch the inner cooking zone on, press the knob and turn it to the required
position. To switch on both the inner and outer zone, turn the knob to / then
release it. The knob will return to the maximum intensity position for the hot plate.
To adjust the heat intensity, turn the knob anti-clockwise to the 0 position. To go
back to heating the inner zone only, return the knob to 0 then turn it to the required
position. To switch off a zone, return the knob to 0.
10