Table of Contents
Advertisement
Instructions for the user
4.1 Description of the controls on the front panel
4.1.1 Programming clock
The programming clock can be used to display the current time or to set a timer or a
programmed cooking operation.
4.1.2 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between 50° and 280°C.
When the knob is turned, the light starts flashing to signal the oven is preheating.
When the selected temperature is reached, a sound signal will sound and the light
will stop flashing and remain lit. If the temperature changes, the light starts flashing
again.
In pyrolitic models, the light switches on when the automatic cleaning cycle
(pyrolysis) starts and remains lit until the cycle is complete.
4.1.3 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on the cooking functions, see:
"8. COOKING WITH THE OVEN".
The door locking device indicator light (
) only comes on when the automatic
cleaning cycle is activated.
4.1.4 Auxiliary oven thermostat knob
This knob allows to select the cooking function and the cooking temperature (only in
static function) for the auxiliary oven. Turning the knob to the
position turns on
the light inside the auxiliary oven. To set the knob on "O" turn it always anti-
clockwise.
The indicator light comes on to indicate that the oven is heating up.
The indicator light goes out when the set temperature is reached. It flashes at
regular intervals to indicate that the temperature inside the oven is being kept
constantly at the set level.
If no cooking time is selected, the timer knob must be positioned on the symbol
(manual).
4.1.5 Hob burners control knob
To light the flame, press the knob and turn it anti-clockwise to the maximum flame
symbol (
). To adjust the flame, turn the knob to the zone between the maximum
(
) and the minimum ( ) settings. To turn off the burner, turn the knob to the
position.
(The adjacent symbol indicates the front left burner).
10
Advertisement
Table of Contents
