Graco Dispensit 1230 Instructions Manual page 6

Dispensit recommends, as many companies require, that the primary air source to the dispense valve be
disconnected before being serviced. It is the users responsibility to ensure that the primary air pressure is
OFF. If the valve is controlled by an electrical system, (e.g., solenoid valve or PLC), the electrical system
should be placed in a position where the air supply to the dispense valve is OFF.
All personnel working with this system should observe the following precautionary guidelines:
•
Abide by all OSHA and NEC safety guidelines
•
All operators, at minimum, must have proper instruction and practice in the use of pneumatics
•
All maintenance personnel must have proper instruction and practice in the proper operation of
this dispense valve.
•
Observe all company safety guidelines pertaining to dispensing equipment
•
Remove watches, rings, and all other jewelry
•
If the unit is to be moved or serviced, wear protective eyewear and, depending on the material
used, any necessary protective clothing (e.g., gloves, long sleeved shirt or smock).
CAUTION: It is the users responsibility to ensure that the primary air pressure is OFF before servicing the
dispense valve.
CAUTION: Always be alert of other potential hazards within your work area.
Safety Precautions (Cont'd)
6