Lincoln Electric RANGER 305G EFI Service Manual page 33

LINCOLN ELECTRIC
slip rings and the brushes, with the abrasive side against the brushes. Pull the sandpaper strip
around the circumference of the slip rings in the direction of rotor rotation only. Repeat this
procedure until the surface of each brush is in full contact with its matching slip ring.
10. Use a low pressure compressed air to thoroughly blow the carbon, commutator stone and/or
sandpaper dust from the machine before operating.
11. Replace the brush holder bracket and perform the Case Cover Replacement Procedure.
Ranger® 305G EFI Service Manual
28