Table of Contents
Advertisement
]
7-1-4
Types of Self-diagnostic Feature
This unit has ADJUST mode and TEST mode as follows:
MODE
Contents
&
Camera adjustment
Refer to Camera Adjustment
S
She
=
;
=
Switching position adjustment
} Ret to aol aduainentpage
<|
Battery DOWN adjustment
Pass adjustment track shift
When adjusting tape pass, set this mode and shift the tracking.
Detection of emergency is inhibited, This allows the following items.
f e d
Na
* Power is not turned off when the battery is ended.
Emergency STOP inhibition
+ SP/LP is not automatically distinguished.
© Emergericy is not detected except for TOP/END detection of the TAPE.
The following functions are added to the emergency display function currently in use.
© The lithium battery is not required because to memorize into EE-PROM is allowed.
Read of emergency code
@ The first emergency and the last emergency are memorized.
@ The mode when the emergency is generated is memorized, in addition to the emergency
contents.
Rotating in forward direction, reverse direction, stopping of each motor can be separately
&
controlled.
a Motor single check
« Drum motor
© Capstan motor
© Loading motor
Function switch check
The acceptance of the function switch of the unit can be confirmed by designating an address.
On the contrary, RM-95 can command the substitution for the function switch of the unit.
Mechanical switch check
The contents of the mechanical switch and the mode switch can be confirmed.
The following sensor is input by performing A/D converting, and the A/D converted value can
be confirmed.
Sensor check
TOP sensor, End sensor,
S REEL FG, T REEL FG, Thermistor for SWP correction, DEW
sensor.
Reception contents check of
wireless remote control
The received code contents of the remote control code can be confirmed.
— 235 —
Advertisement
Table of Contents
