Table of Contents
Advertisement
FN
a
YR
SE
a
ea
Troubleshooting (continued)
Symptom
Remedy
A tape cannot be inserted.
© Check that a tape isn't already in the tape
compartment.
The remote commander does
* Make sure you are pointing the remote commander at
not function.
the remote sensor on the VCR.
* Replace all the batteries in the remote commander with
new ones if they are weak.
¢ Set COMMAND MODE selectors on both the VCR and
the remote commander to the same positions.
© Make sure the[ TV|/[VIDEO] remote control switch is
set correctly.
The tracking indicator does not
¢ The recording condition of the tape is very poor and
appear on the screen.
tracking cannot be adjusted.
in
2
@
Youcannot control other TVs.
¢ Set your TV's code number. The code number resets to
F
01 when you replace the batteries of the remote
commander.
e
Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.
The VCR needs to be cleaned.
62 | Additional Information
Advertisement
Table of Contents
