Table of Contents
Advertisement
a
a
Ee
I
AE
TE
TE
EE)
Manual setup — Setting up VIDEO Plus+ (continued)
Setting up VIDEO Pius+ for satellite broadcasts
When your satellite tuner is connected via the AERIAL IN connector, first
you have to set the programme position for each satellite channel using the
TUNER PRESET menu. Then set the guide channel number for each
satellite channel using the SET UP CH & VIDEO Plus+ menu.
If your satellite tuner is connected via the LINE-3 IN connector, you don't
have to set programme positions nor guide channel numbers for satellite
channels. Skip the following operations.
1
Turn on the satellite tuner.
Press MENU, then select TUNER PRESET and press EXECUTE.
2
3
Press PROG +/-~to select a programme position you want to use for
watching a satellite channel.
4
Select CHANNEL SET, then press CURSOR
WONER EREGE
PROG
IS)
=> to tune the VCR to the satellite tuner.
EE
The channel number displayed beside
FINE TUNING
CHANNEL SET is used for receiving all
satellite broadcasts from the satellite tuner.
SELECT
:
SET
:
5
Press PROG +/- to select another programme position for another
satellite channel, and press the programme number buttons to enter the
same channel number as the one displayed in step 4.
Repeat this step for all satellite channels.
6
Set the guide channel number for each programme position assigned to
the satellite channel, following the procedures in "Manual setup —
Setting up VIDEO Plus+" on page 21.
Notes
¢ The menu disappears automatically if you don't proceed for more than a few
minutes.
¢ If you use a satellite tuner connected via the LINE-3 IN connector, you don't have
to set up VIDEO Plus+. Just record a satellite programme using VIDEO Plus+, and
the VCR automatically records the programme from the LINE-3 IN connector.
If you inadvertently entered a guide channel number, press CURSOR */4
repeatedly to reset the "GUIDE CH" column to "---." "---" appears between 1 and
255.
* The VCR does not allow entering the guide channel number, if the same number
has been set.
When you record a satellite broadcast using VIDEO Plus+, you need to select the
desired channel on the satellite tuner manually.
24| Getting Started
Advertisement
Table of Contents
