Sony SLV-T2000UX Operating Instructions Manual page 61

Table of Contents

Advertisement

Playback
Recording
Symptom
Remedy
The picture has no sound.
° The tape is defective. Use a new tape.
The sound is unstable orhasan
¢
echo.
When you play a tape with the same sound recorded
on both the hi-fi and normal sound tracks, make sure
the VHS AUDIO MIX option in the SET UP MENU is
set to OFF.
No TV programme appears
.
on the TV screen.
Make sure the TV is set to the video channel. If you
are using a monitor, set it to video input.
If the VCR is connected to the TV using only the aerial
cable, make sure that the RF MODULATOR option in
the SET UP MENU is set to ON.
TV reception is poor.
Adjust the TV aerial.
If the VCR is connected to the TV using only the aerial
cable, set the RF MODULATOR option in the SET UP
MENU is set to ON.
The tape starts playing assoon
= °
as it is inserted.
The safety tab of the VHS tape has been removed. 'To
record on this tape, cover the tab hole.
The tape is ejected when you
bd
press @ REC.
Check that the safety tab of the VHS has not been
removed, or that the safety switch of the 8 mm tape
has not been slid to show the red portion.
Nothing happens when you
press @ REC.
°
Make sure the tape is not at its end.
Select the correct source with the INPUT SELECT
button. Select a programme position when recording
TV programmes; select "L1," "L2," or "L3" when
recording from other equipment.
Timer
recording
The timer does not operate.
°
e
Timer recording cannot be
made by one deck.
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab of the VHS has not been
removed, or that the safety switch of the 8 mm tape
has not been slid to show the red portion.
Make sure the tape is not at its end.
Make sure a programme has been set for timer
recording.
Make sure your timer settings have not already passed
the current time.
Check that the decoder is turned on.
Check that the satellite tuner is turned on.
The clock stops if the VCR is disconnected from the
mains for more than one hour. Reset the clock and
timer.
Make sure to use the deck which you have selected
TIMER REC option in the SET UP MENU.
continued
Additional Information
| 61

Advertisement

Table of Contents
loading

Table of Contents