Sony SLV-T2000UX Operating Instructions Manual page 40

40
Daily/weekly recording
In step 3 on the previous page, press CURSOR F to select the recording
pattern. Each time you press CURSOR 4, the indication changes as shown
below.
the current date > SUN-SAT —-» MON-SAT —> MON-FRI —» EVERY SAT.....
~» EVERY MON — EVERY SUN — 1 month later (cycles backward)
— the current date
Timer recording with PDC signals
The broadcast systems transmit PDC (Programme Delivery Control) signals
with its TV programmes. These signals ensure that your timer recordings
are made regardless of broadcast delay, early starts or broadcast
interruptions.
In step 3 on the previous page, press CURSOR 4/¥ to turn on/off the| V/P]
indicator after you set the recording date. If you do not want to set the PDC
function, turn off the V/] P| indicator.
You can also use the PDC function for a source connected to the LINE-1 (TV)
and LINE-3 IN connectors, and the LINE-2 IN jacks.
Tips
* To set the programme position, you can also use the PROG +/- or programme
number buttons.
* To set the tape speed, you can also use TAPE SPEED. (VHS deck only)
Notes
When setting the timer with PDC signals, enter the start and stop times exactly as
indicated in the TV programme guide, otherwise the PDC function won't work.
If the PDC signal is too weak or the broadcasting station failed to transmit PDC:
signals, the VCR will start recording at the set time without using the PDC function.
You cannot make setting for timer recording on both 8 mm deck and VHS deck,
since you have to select the deck before you make setting. If one deck has been
already standing by for timer recording, select that deck for timer recording.
* While one deck is standing by for timer recording or proceeding timer recording,
another deck can only play back a recorded tape and record the line input source.
Basic Operations