Hotwire Dsl System Components - Paradyne Hotwire 8303 User Manual

The following illustration shows a typical Hotwire configuration using IDSL cards.

Hotwire DSL System Components

The DSL system consists of a chassis that houses a Management
Communications Controller (MCC) card and up to 18 DSL cards. The Hotwire
8620 and 8820 GranDSLAM chassis can also house a Shelf Concentration
Module (SCM) card, depending on the application. See the
Concentration Module (SCM) Card User's Guide
The minimum hardware requirements for a Hotwire DSL system consists of the
following components:
T
T
T
8000-A2-GB26-70
Central Office (CO)
DSLAM
Network
DSL
Service
CARD
Provider
Legend: BRITE – Basic Rate Interface Transmission Extension
COT – Central Office Terminal
DSL – Digital Subscriber Line
RT – Remote Terminal
NOTE:
All references to MCC cards in this document refer to the MCC, MCP and
MCC Plus cards, unless specifically noted otherwise.
One Hotwire chassis
Management card(s)
DSL card(s)
April 2002
Digital Loop
Carrier (DLC)
COT RT
BRITE BRITE
T1 or
Fiber
Channel
Bank
for more information.
1. Hotwire DSL System Description
Customer Premises (CP)
Data
Interface
SN
Twisted
Pair
Wire
00-16698-01
Hotwire Shelf
1-3