Network Problems - Paradyne Hotwire 8303 User Manual

Mvl, reachdsl, radsl, idsl, and sdsl cards
Hide thumbs Also See for Hotwire 8303:
Table of Contents

Advertisement

Example 5. Link Restart Commanded Retrain Messages
The following SYSLOG messages have been received:
02/18/2000 15:16:15 Restart Caused by Link Restart DSL port 2
02/18/2000 15:17:01 Remote Restarted at 02/18/2000 15:16:52
02/18/2000 15:17:01 Remote Reed Solomon Restart, DSL port 2
Meaning:
The port card retrained because of a Link Restart command issued by an
operator. The remote unit retrained because the port card retrained.

Network Problems

To provide a practical aid in the isolation and resolution of Layer 2 network
difficulties, the guidelines in this section provide information on troubleshooting a
generic network containing the devices found in most networks.
The illustration below shows the generic network addressed by this chapter.
These procedures assume that Asynchronous Transfer Mode (ATM) is used on the
link between the IPC and the next hop router (NHR).
8000-A2-GB26-70
ISP
Next Hop
Gateway
Router
Router
(NHR)
ISP
WAN
NMS
WAN
Service Domain
Management Domain
IPC = Interworking Packet Concentrator
ISP = Internet Service Provider
NMS = Network Management System
SN = Service Node
April 2002
5. Diagnostics and Troubleshooting
IPC
DSLAM
I
O
NMS
SN
Clients
SN
Hub
99-16153a-01
5-11

Advertisement

Table of Contents
loading

Table of Contents