Components Of A Hotwire Screen - Paradyne Hotwire 8303 User Manual

2. Hotwire Menus and Screens

Components of a Hotwire Screen

A typical Hotwire screen looks like this:
2
3
4
2-2
1. System Header Line is the top line of the screen. This line has two fields that
provide system login information.
— The first field displays the system name or the individual card name.
(Access the System Information screen by selecting the appropriate card
in the chassis and then follow this menu sequence: Configuration
Status Card Info .) If you do not define the system name, the DSL user
interface will display <no name>. The current login may also be displayed
here.
2. Display Area is the main portion of the screen on which pertinent DSL system
information is displayed. This is also the portion of the screen on which fields
requiring input are displayed. However, you cannot enter values for the fields
in this portion of the screen. You must enter field values in the Input Line at the
bottom of the screen (see
3. Input Line is the area of the screen below the line where you are prompted to
enter values for the specific field that is highlighted on the screen.
For example, in the Card Information screen above, the Card Name field is
highlighted. If you want to modify card information, you must enter the card
name at the Input Card Name: prompt at the bottom of the screen.
April 2002
1
Step 3).
Card
8000-A2-GB26-70