Client Cannot Reach IPC
This section examines the AN-to-IPC segment of the network.
8000-A2-GB26-70
NOTE:
On the IPC, verify that there is a MAC address for the client (enter the
macinfo command). If the correct MAC address appears on the IPC, and all
the items in the previous sections have been examined, it is safe to assume
that this segment of the network is functioning properly. Skip this section and
go to
Client Cannot Reach Router
appear, check the items in
ISP
Next Hop
Gateway
Router
Router
(NHR)
ISP
WAN
NMS
WAN
April 2002
5. Diagnostics and Troubleshooting
on page 5-19. If a MAC address does not
Table 5-6, AN-to-IPC
Segment.
DSLAM-to-IPC
Segment
IPC
DSLAM
I
O
NMS
SN
Clients
SN
Hub
99-16174-01
5-17