Accessing The Hotwire - Dsl Menu; Exiting From The System; Manually Logging Out; Automatically Logging Out - Paradyne Hotwire 8303 User Manual

2. Hotwire Menus and Screens
Accessing the Hotwire – DSL Menu
Procedure
To access the Hotwire – DSL menu:

Exiting from the System

You can manually log out of the system or, after five minutes (on MCC or SCM) or
ten minutes (on Access Node) of inactivity, the system will automatically log you
out.

Manually Logging Out

Procedure
To exit from the Hotwire DSL system:

Automatically Logging Out

The DSL system has an automatic timeout feature that logs you out of the system
after five minutes (on MCC or SCM) or ten minutes (on Access Node) of inactivity.
You will need to log back in to continue your work.
To log back in, press Enter to display the User Login screen and log in.
2-16
1. From the Hotwire Chassis Main Menu, select one of the following:
— A for Quick Card Select
— B for Port Card Select
The desired selection screen appears.
2. Verify that the DSL card you want to access appears on the selection screen.
3. At the Goto: prompt, type the slot number of the desired card. For example, if
you want to configure the DSL card in Slot 13, type 13. Then, press Enter.
The Hotwire – DSL menu appears.
1. Return to the card selection screen by selecting Exit from the Hotwire – DSL
menu.
2. Press Ctrl-z.
3. From the Hotwire Chassis Main Menu, select Logout.
The system exits from the current login session on the Hotwire DSL system.
April 2002 8000-A2-GB26-70