New Features For This Release; Document Summary - Paradyne Hotwire 8303 User Manual

About This Guide

New Features for This Release

This -70 version of the document adds information for the Hotwire 6350
ReachDSL Modem.
GranDSLAM Release 2.3 supports:
T
T

Document Summary

vi
NOTE:
It is highly recommended that you read the
Communications Controller (MCC) Card, IP Conservative, User's Guide
before you begin to use this guide and the Hotwire software.
Asymmetric upstream and downstream speeds for ReachDSL v2 cards.
Full duplex mode on the 100BaseT port of the Model 8343 card.
Section
Chapter 1, Hotwire DSL System
Description
Chapter 2, Hotwire Menus and
Screens
Chapter 3, DSL Card Configuration
Chapter 4, Monitoring the Hotwire
DSL System
Chapter 5, Diagnostics and
Troubleshooting
Appendix A, Download Code
Appendix B, Traps
Appendix C, Hotwire 6350
ReachDSL Modem
Index
April 2002
Hotwire Management
Description
Provides an overview of the Hotwire DSLAM and
GranDSLAM systems.
Describes the operation of Hotwire menus,
screens, and commonly used navigation keys.
Also provides instructions on how to log in and log
out of the system.
Describes procedures and contains tables for
configuring the DSL cards on the Hotwire system.
Describes operator programs that monitor the
Hotwire system.
Describes common Hotwire operational problems
and solutions. Contains SYSLOG information.
Describes how to work with the Download Code
and Apply Download menus.
Describes the traps that are generated by the
Hotwire system.
Contains information for the Hotwire 6350
ReachDSL Modem.
Lists key terms, acronyms, concepts, and
sections in alphabetical order.
8000-A2-GB26-70