Supermicro X13DGU User Manual page 163

Security Function
Select Set Password to set an HDD/SATA password which allows you to configure the security
settings of the HDD/SATA device. Select Security Erase - Password to enter a SATA user
password to allow you to erase the password and the contents previously stored in the HDD/
SATA device. Select Security Erase - Without Password to use the manufacturer default
password "111111111" as the SATA user password and allow you to erase the contents of the
HDD/SATA device by using this default password. The options are Disable, Set Password,
Change Password, Clear Password, Security Erase - Password, Security Erase - PSID, and
Security Erase - Without Password.
Note 1: The option of Security Erase - PSID is based on the storage device support.
PSID is the abbreviation for Physical Security Identification.
Note 2: The options of Change Password and Clear Password are available when
"Password" below has been set.
Note 3: The option of Set Password is not available when "Password" below has been
set.
Password
Use this feature to set the SATA user password which allows you to configure the Supermicro
Security Erase settings by using the SATA user password.
HDD Security Configuration:
P4: (Storage Device Name)
This section is available when the storage device is detected by the BIOS. Select this device.
Press <Enter> and the following information is displayed:
•
HDD Password Description:
•
HDD PASSWORD CONFIGURATION:
•
Security Supported:
•
Security Enabled:
•
Security Locked:
•
Security Frozen:
•
HDD User Pwd Status:
•
HDD Master Pwd Status:
163
Chapter 4: UEFI BIOS