Supermicro X13DGU User Manual page 152

Super X13DGU User's Manual
Create RAID Volume
Name:
This feature allows you to enter the unique name of RAID volume.
RAID Level:
This feature allows you to select the RAID level. The options are RAID0(Stripe),
RAID1(Mirror), RAID5(Parity), and RAID10(RAID0+1).
Select Disks:
Select the desired RAID disks one by one by setting them to X. The options are (not
selected) and X (selected).
Strip Size:
Use this feature to select the RAID strip size. The options are 4KB, 8KB, 16KB, 32KB,
64KB, and 128KB. The available options are based on the setting of "RAID Level:" above.
Capacity (GB):
This feature allows you to enter the desired RAID capacity (in GB).
Create RAID Volume
Use this feature is to create a RAID volume with the settings above. The options are Yes and No.
Non-RAID Physical Disks:
This feature displays the information of non-RAID physical disk(s).
RAID Volumes:
This feature displays the information of RAID volumes that have been created earlier.
Intel(R) Virtual RAID on CPU
Note: It is available when your system supports this feature and when "Enable/Disable
VMD" is set to Enable.
The following information is displayed.
•
Intel(R) VROC with VMD Technology x.x.x.xxxx
•
Upgrade key:
•
Intel VROC Managed Controllers:
152