Supermicro X13DGU User Manual page 146

Super X13DGU User's Manual
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Enable this feature for HTTPS boot to check the hostname of the TLS certificates to see if it
matches the host name provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
Priority of HTTP Boot
Instance of Priority 1 (Available when your motherboard supports this feature)
This feature sets the rank target port. The default setting is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
Boot Description
Use this feature to enter a boot description, which cannot be longer than 75 characters. Please
be user to enter a boot description; otherwise, the boot option for the URI cannot be created.
Boot URI
Enter a Boot Uniform Research Identifier (URI) with 128 characters or shorter. This Boot URI
determines how IPv4 Boot Option and IPv6 Boot Option will be created. This feature is only
supported on Dual or EFI Boot Mode.
146