Supermicro X13DGU User Manual page 162

Super X13DGU User's Manual
5. When AMI BIOS screen displays, using arrow keys, select Security from the BIOS menu
bar on the top of the screen. The Supermicro Security Erase Configuration submenu will
display on the Security menu as shown below.
6. Select Supermicro Security Erase Configuration and press <Enter> to enter the Secure
Erase configuration page, which will allow you to configure Security Erase settings.
How to Configure Supermicro Security Erase Settings
Use this section to configure the Supermicro-proprietary Security Erase settings. When
this submenu is selected, the following information will display. Please note that the device
information displayed on your screen may differ, depending on the storage devices installed
in your system.
•
HDD Name: This feature displays the name of the HDD/SATA drive that is detected by
the BIOS.
•
HDD Serial Number: This feature displays the serial number of the HDD/SATA device that
is detected by the BIOS.
•
Security Mode: This feature displays the security mode of the HDD/SATA device that is
detected by the BIOS.
•
Estimated Time: This feature displays the estimate time needed to perform the selected
Security Erase features.
•
HDD User Pwd Status: This feature indicates if a password has been set as a SATA user
password which allows you to configure Supermicro Security Erase settings on the HDD
(SATA) device by using this SATA user password.
•
TCG Device Type: This feature displays the TCG device type detected by the system.
•
Admin Pwd Status: This feature indicates if a password has been set as a SATA adminis-
trator password which allows you to configure Supermicro Security Erase settings on the
HDD (SATA) device by using this SATA administrator password.
Note For more information on Secure Erase instructions, please refer to the Secure
Erase Instructions User's Guide posted on the web page under the link:
supermicro.com/support/manuals/.
162
http://www.